Has the time come to replace your aging HVAC system? Do you want to upgrade the efficiency vacctrack your current set-up? Are you having issues with rooms which are uncomfortable to live in? Regardless of why you are here, this article has the tips and tricks you need to succeed.
Make sure you check the filters in your air conditioning unit. This is important because checking your filters could make the difference between inexpensive repairs and more expensive ones down the line. Try to put it into your monthly schedule so that you don’t forget to check the filters regularly.
Look for deals and rebates on the HVAC system you are having installed. Many ENERGY STAR units come with huge rebates either from your local utility company or the government itself. Investigate your options as it could save you hundreds or even thousands of dollars on the installation costs.
Cleaning the blades and coils will help the system run better. Turn off the power if you are going to work on your HVAC system. Remove leaves and debris from the outdoor unit.
Look to your neighbors and family to get recommendations of good HVAC specialists. Likely there’s someone you know who’s already done a ton of research. Use this knowledge to help get you the best specialist you can. This can save you many hours of research time and money too.
Do you hear a clicking sound when your fan is turning? This may mean that there is something in the way of the blades of the fan. If it gets so bad that the blade bends, you must replace it, just unbending it will leave the fan unbalanced and can cause further issues.
You should be sure to change the air filter of your HVAC system once every six months. Neglecting to do so can cause dust particles to clog the air ducts. In turn, your system will not work properly and you will find your bills going up. It’s worth spending the time to clean the filters.
Make sure things don’t get too hot or cold where your thermostat is. Any electronics or heat sources like lamps or televisions nearby can trick the thermostat into thinking the home is warmer than it actually is. This just means it runs your air conditioning longer than necessary, wasting energy and money.
Use your HVAC system to heat your water for free! In the summer, residual heat pulled out of your house is used to heat water through a geothermal system. This will cool your home while allowing you to save a ton on hot water costs, plus it’s environmentally friendly to boot!
If you live in a hot climate, don’t use duct tape on your HVAC. It just dries out and falls off, leaving you with leaks all over the place. Instead, use mastic sealant to cover any holes or gaps in duct work and you’ll keep your home comfortable all year long.
Consider painting the outside of your home in a light color to reflect heat if you live in a hot climate. If your summers are cool, use a dark color to instead heat up your home in the winter. This simple change can end up saving you a lot on your utility bills.
When you are looking to buy a new air conditioner, consider your climate. If you live in a hot, dry area, then an evaporative cooler will be your best bet. If you live in a humid area, opt for a compressor-style unit as it’s the only one which will work.
Be sure to check your Filter Check light frequently on any stand-alone units. If it is on, turn the unit off as you can’t operate it without a filter in place. Clean the filter carefully and return it to its proper location, but don’t operate the unit if the filter is still wet.
Make sure you wipe up any water that is close to the air intake of the vents of your HVAC system. Clean up any water that is standing around because water can cause mold to easily expand. Some water buildup is normal but if you’re picking up water more than once every six months you might have a problem, so contact a HVAC technician.
Ask your neighbors who they have fixing their HVAC systems. Neighborhoods are often built at the same time and will have the same set-ups for heating and cooling. That means if someone did a good job on their unit, they should offer you the same high quality service as well.
Choose a contractor who installs items from more than one manufacturer. They should be able to compare multiple brands to ensure you are getting the right unit for your needs, not just what they have on hand. This will save you time and money when you have a great system in place.
If you already have someone servicing your HVAC unit every year, consider talking to them about installing a new system. Even if you need something custom built, they may have staff on hand who can do what you need. If you already trust them, you know they’ll be right for the job.
When you get a contractor to come by to offer a quote to you, make sure they do include heat-loss calculation. This particular equation will help you estimate the number of BTUs needed to keep the home in a comfortable condition. Windows and doors need to be inspected for drafts, insulation checked for efficiency and the interior dimensions of the house should also be considered.
Ask your contractor if there are any upgrades which can boost your home’s energy efficiency. For example, could extra insulation be added to the attic? Or should your windows and doors be better sealed? Once these are in place the change may be dramatic enough to allow you to install a cheaper HVAC unit.
With all of these great ideas fresh in your mind, go out and find the HVAC help you need. Whether you have to hire a contractor or do the work yourself, your knowledge will get you a long way. All you have to do today is get started on your project!